Induction Water-saving Tap

Water-saving Tap

Each year, a large part of our budget covers water bills. A dripping tap, running water while brushing your teeth, perhaps a wasteful way of washing dishes or cleaning fruit can lead to wasting water. Minimise your water use and improve water flow with this smart tap. Not only will it reduce your water bills and help you save money, but it also will have a good effect on the environment. It’s a budget-friendly and eco-friendly accessory for your home or workplace.

Fast-response Sensor

The device is equipped with an infrared proximity sensor as well as a mechanism that opens the water valve to allow water to flow. It happens as a response to the user’s hands being close to the tap. The sensor responds in a very short time - it takes only 0.25 sec to open the water flow. It’s a very convenient solution because there’s no need to touch the tap to open the water flow. It will also help prevent unsightly water stains around the sink and on the tap itself.

Two Sensing Modes

Another great feature of this induction water saver tap is its built-in double sensor system. The instant mode uses the floor sensor. Its sensing distance is about 0-10 cm. It will provide you with a fast water flow and an automatic stop after 20 seconds. The continuous mode uses the side sensor with 0-5 sensing distance. It will make water flow for about 3 minutes. Choose the mode you want to use depending on your needs and use it without even touching the tap thanks to the optimized infrared sensor technology.

Energy-saving

This eco-friendly tap not only saves water, but it’s also energy-saving. In standby mode, the energy consumption is only ≤0.2mW. The battery capacity is as much as 450mAh and is charged with a type-C USB cable, which is included in the package. But if you want to, you can easily use any other charger as long as it’s the same type. It makes charging convenient and easy.

The device is fast-charging. It should only take approximately 3 hours to fully charge it. Moreover, once charged, the tap is designed to work for months.

Durable Design

Made of high-quality material, this water-saving tap is sturdy and designed to serve you for a long time. It’s lightweight and compact. Its protection grade is IPX6, which means it’s waterproof and designed to resist high-pressure and heavy sprays of water.

Thanks to its design, it should work with water of temperature ≤75°C, thanks to which you can easily use it both in the kitchen and in the bathroom for different purposes. Install it quickly in any place you want to thanks to its versatile design. You don’t need any extra skills to do it. Everything is designed with your comfort in mind.

Technical characteristics :

• Item size: 5.5 cm x 5.2 cm x 3.4 cm
• Standby energy consumption: ≤0.2mW
• Working water pressure: 0.05-0.8MPa
• Working water temperature: ≤75°C
• Sensing area: Side sensor 0-5cm/Bottom sensor 0-10cm
• Protection grade: IPX6
• Charging method: USB
• Charging port: Type-C

Included :

1 x Induction water saver tap

1 x Hex mounting wrench

3 x Seal Rings (M20-N, M22-N, M24-W)

2 x Adapters (M20 internal thread, M24 outside thread))

1 x Fixing joint (M22)

1 x USB type-C cable